prefabricated houses Zambia –  clinic project

Project introduction:

Prefabricated house Zambia is a local clinic project in Ndola, Zambia.Prefabricated houses Zambia is very popular. Because prefabricated housing system is very convenient, fast and effective. All the steel frame is prefabricated in our factory, only need to use the bolt and screw to connect them. All the wall panels are pre-cut, then means no much cutting job will cause on site. The prefabricated rate can reach 80%.

Project requirement and design:

there is no specific climate data in Lesotho.So our engineer just design it according to the budge. The prefabricated houses Zambia project use the EPS (Polystyrene) sandwich panels to make the wall and roof panel. But the clinic require more cleaner and flatter wall, so we make the polystyrene in higher density of 14kg/m3, and more thicker color steel sheet of 0.426mm. And also use the gysum board as the ceiling.

More about prefabricated house:

http://www.cbmprefabricatedhouse.com/prefabricated-house/